Embroidery Machine Hat Hoop Cap Frame & HoopTech Compact Cap Back Clamp combo

Description

Embroidery Machines
Sergers
Embroidery Hoops
Embroidery Software
Sewing Cabinets
Embroidery Thread
Store
Embroidery Machine Hat Hoop Cap Frame - Dream Frame For Brother or BabyLock
FOR BABYLOCK 6 Needle EMP6, BMP8, BMP9,
****NOTE*** YOU WILL NEED to have already purchased a BROTHER DRIVER PRCF3 FOR THIS TO WORK ON YOUR MACHINE.
You must already have PRCF3 to be able to use the Dream Frame.
it is an extra frame to use with PRCF3 driver and jig.
DO NOT PURCHASE THIS IF YOU ARE NOT 100% CERTAIN YOU HAVE THE PROPER DRIVER ON YOUR MACHINE   >>>   PLEASE CALL US IF YOU ARE NOT SURE 1-800-898-0893
HoopTech Compact Cap Back Clamp for cap Drivers For BabyLock, Tajima + MANY MORE
YOU CAN ALSO USE THIS AS A SIDE HAT CLAMP HOOP!!!!  SEE PICTURES
Compact Cap Back Clamp for cap drivers
The Hoop Tech Products - Compact Clamp for Cap Backs is the easiest and fastest way to frame up a cap back. The extra large sewing field with locating points for centering, makes it easy to sew low across the cutout or high on the cap crown for those large design requests.!!
The easy to use patent pending single lever cam locking lever quickly clamps the cap and backing in place and you’re ready to sew.
The Compact Cap Back Clamp fits most existing Tajima style drivers.
Features Include:
(2) Backing holding clips to secure packing while framing up the cap.
Mounts to machine using existing cap driver.
Single lever opens, closes and locks the clamp.
All stainless steel metal construction for many years of service.
Fully adjustable clamp adjusts to different fabric thickness.
Clamping action does not leave “hoop burns”
Use your existing framing gage or the Hoop Tech Framing Gage with the patented T-bar stretcher.
Even “Flex Fit” made easy
The Compact Clamp for Cap Backs makes short work of the challenging Flex Fit caps. The elastic fabric and sweat band are easily clamped and adjusted for a smith, tight hold. Making embroidery on the back of caps quick and easy.
The COMPACT CAP BACK C
RECOMMENDED TO USE WITH T BAR FRAMING GAGE
Compatible with Brother PR600,PR600C, PR600II, PR620, PR650, PR655, PR655C  and BabyLock EMP6, BMP8, BMP9 series commerical embroidery machines.
FREE SHIPPING IN LOWER US!
Questions...Call us at 800-898-0893
"GEN 2" from Hoop Tech
THE BEST CAP FRAME SOLUTION FOR SEWING ON FINISHED CAPS
The GEN 2 from Hoop Tech is the next generation HTP style cap frame. Originally called The Dream Frame, the GEN 2 was redesigned to allow sewing closer to the bill than ever before. And it is the easiest cap frame that we have ever made to frame all styles of caps, even visors!
The new "GEN 2" from Hoop Tech is the next generation EMS style cap frame. It was specially designed to maximize the sewing field on the front two panels of a finished cap, while still maintaining registration.
This cap frame is lighter, has backing holding clips, is easier to frame, and with the new bill retaining strap you can sew closer to the bill than ever before.
The GEN 2 works with all types of caps:
Structured - Unstructured - Low Profile - Full Crown - Strap Back - Flex Fit - Fitted - Flat Bill - Pre-curved - New Era - Pacific - Nylon - Military Style. And don't forget VISORS! (With and without sweatbands)
Now, finally an easy way to hold and sew visors! Full field sewing access with no bill restriction. Don’t settle for putting your design just where you can get it to sew, Put your design where it looks good!
The new “GEN 2” features include:
- A spring steel bill retainer that sets and holds the bill angle.
- Backing clips to hold your stabilizer in place during framing.
- Internal retaining fingers for proper bill alignment.
- Lighter frame design (20% less weight) than the original.
- Redesigned bill retainer with closer access to the bill.
- Open design Top Clamp.
- Large sewing field.
We have G2 Cap Frames to fit all major machine manufacturers.
Tajima - Melco - Toyota - Barudan Advantage - ZSK - Meistergram - Happy - Highland - SWF
- Prodigi - Generations - PR-600 &1000 Series - Baby Lock and other Tajima style drivers
The EMS / Hoop Tech Cap Frames are built tough to stand up to day to day production use. The heavy gage stainless steel construction will give you years of service. The EMS / Hoop Tech Cap frame design allows for variation in cap size, shape and material thickness. When used with the Hoop Tech patented “T”-Bar Framing gage, framing a finished cap becomes as easy as 1-2-3.
The T-Bar Framing gage is the secret!
The T-Bar Framing Gage gives you the leverage to stretch the cap fabric down so that it lays flat on the gage, then the GEN 2 clamps it in place for great registration.
The stitch quality of the “GEN 2” is even better than the original EMS style cap frame and it’s easier to frame using the redesigned adjustable T-Bar Framing Gage.
BROTHER PR & BABY LOCK
ATTENTION BROTHER PR & BABY LOCK OWNERS
- The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
The "GEN 2" now makes Flex Fit, New Era & Port Authority easy to frame and sew.